Search
Home > Issues > Retrieve
Melt-spinning법을 이용하여 제조된 비정질 리본의 Single Strip 방법을 이용한 자기적 특성 측정 연구
한국자기학회지, Volume 27, Number 6, 31 Dec 2017, Pages 221-225
Abstract
본 연구에서는 melt-spinning법을 이용하여 제조된 비정질 Fe64.5Co7Si5B15.5Nb3.5Al4.5 리본의 열처리 온도에 따른 결정성장 및 이에 따른 자기적 특성의 변화를 연구하였다. 취성이 큰 리본의 자기적 특성 측정을 위해 단일 스트립 방법을 이용하여 50 Hz~100 kHz 대역에서 B-H 이력곡선을 측정하였으며, 1MHz~100 MHz 대역에서 복소 자기투자율을 impedance analyzer를 이용하여 측정하였다. 단일 스트립 측정을 통해 측정 주파수 및 열처리 온도에 따른 보자력의 증가를 확인하였으며, 이는 각각 Eddy current 및 리본의 결정성장에 기인하는 것으로 이해되었다.
In this study, we have investigated the frequency and annealing temperature dependent magnetic properties of melt-spun Fe64.5Co7Si5B15.5Nb3.5Al4.5 amorphous ribbon. We have measured B-H magnetic hysteresis loops in the frequency range of 50 Hz~100 kHz using single-strip method and magnetic permeabilities in the frequency range of 1MHz~100 MHz using impedance analyzer. We observed the increase of coercivity as a function of measurement frequency and annealing temperature due to Eddy current effect and crystallization, respectively.
In this study, we have investigated the frequency and annealing temperature dependent magnetic properties of melt-spun Fe64.5Co7Si5B15.5Nb3.5Al4.5 amorphous ribbon. We have measured B-H magnetic hysteresis loops in the frequency range of 50 Hz~100 kHz using single-strip method and magnetic permeabilities in the frequency range of 1MHz~100 MHz using impedance analyzer. We observed the increase of coercivity as a function of measurement frequency and annealing temperature due to Eddy current effect and crystallization, respectively.
Keywords: 비정질리본; 단일스트립 측정; B-H 이력곡선; 자기투자율; amorphous ribbon; single-strip measurement; B-H hysteresis loop; magnetic permeability
DOI: https://doi.org/10.4283/JKMS.2017.27.6.221