Issues

Search

Home > Issues > Search

Fe-Si-Cr 분말합금의 열처리 효과

한국자기학회지, Volume 26, Number 1, 29 Feb 2016, Pages 7-12
장평우 * (청주대학교 이공대학)
Abstract

전기비저항이 높아 1 MHz 이상 고주파용 코어재료로 적합한 Fe-9%Si-2%Cr 합금분말의 열처리 온도에 따른 투자율 거동과 규칙-비규칙 전이에 대해 연구하였다. 분무과정에서 B2 규칙상의 생성이 억제되지 않았으며, 550 oC 이상에서 열처리 했을 경우 DO3 상의 회절선을 검출할 수 있었다. 열처리 온도가 증가할수록 격자상수와 보자력은 감소하였으나 450 oC에서 보자력의 갑작스런 큰 증가가 있었다. 150 oC의 비교적 낮은 열처리 온도에서 가장 높은 투자율을 나타내었고, 이후 열처리 온도가 증가할수록 투자율은 감소하였다. 이상의 거동은 DO3 규칙상의 생성과 이에 따른 비저항의 변화로 설명할 수 있었다.

Effects of annealing of the gas-atomized Fe-9%Si-2%Cr powder which is suitable for high frequency application in mobile devices because of its high electrical resistivity were studied with an emphasis on the order-disorder phase transition. The formation of B2 ordered phase could not be suppressed during atomization process. When the powder was annealed at a temperature higher than 550 oC the peak diffracted from DO3 phase could be detected. With increasing annealing temperature lattice parameter and coercivity decreased. An interesting phenomenon was an abrupt increment of coercivity in the powder annealed at 450 oC. Highest permeability could be shown in the powder annealed at a relative low temperature of 150 oC and then the permeability decreased with annealing temperature. The above-mentioned results could be successfully explained by both the formation of DO3 ordered phases and the
change of electrical resistivity of the Fe-Si-Cr powder which was also originated from the phase transition.

 

Keywords: Fe-Si-Cr 분말; DO3; B2 규칙상; 열처리; 전기비저항; 투자율; Fe-Si-Cr powder; DO3 phase; B2 phase; annealing; electrical resistivity; permeability
DOI: http://dx.doi.org/10.4283/JKMS.2016.26.1.007